Rubber Mold Release Agents for Consistent, Clean Demolding | Green Petro™
Engineered for EPDM, NBR & High-Temperature Rubber Applications
Rubber Mold Release Agents by Green Petro™
At Green Petro™, we specialize in rubber mold release agents designed to meet the performance and safety requirements of today’s demanding industrial environments. Whether you manufacture automotive hoses, rubber gaskets, seals, or tire treads, our advanced water-based release systems ensure a clean demold, minimal residue, and high surface finish—cycle after cycle.
Our rubber release agents are non-toxic, biodegradable, and heat-stable up to 300°C, making them ideal for use in EPDM, NBR, NR, and silicone rubber molding. Developed in our in-house R&D lab in Faridabad, India, Green Petro™’s solutions help Indian and global manufacturers reduce cycle time, minimize fouling, and improve mold life—without compromising safety or compliance.
What Are Rubber Mold Release Agents?
Rubber mold release agents are specialty chemical formulations applied to the surface of a mold to prevent rubber components from sticking during the demolding process. Traditional agents often contain silicone oils, solvents, or fluorinated compounds (PFAS)—but at Green Petro™, we take a sustainable, water-based approach.
Our rubber-compatible formulations are built with:
- ✅ Silicone polymers or non-silicone additives
- ✅ Water-based emulsions (VOC compliant)
- ✅ Non-reactive, high-slip agents
- ✅ Biodegradable ingredients
They form a micron-thin, heat-resistant barrier between the mold and the rubber part, allowing for easy release, reduced surface defects, and faster cycle times.
✅ Why Choose Green Petro™’s Rubber Mold Release Agents?
🌡️ High Thermal Stability
Formulated to perform under continuous high-temperature molding (up to 300°C), especially in steam and compression molding of EPDM and NBR.
💨 Low VOCs, Non-Flammable
Our water-based systems emit no harmful fumes, are non-flammable, and safe for workers and equipment.
🧪 Compatible with All Rubber Types
Works effectively on EPDM, NBR, NR, SBR, HNBR, VMQ, and more. Does not interfere with vulcanization or post-processing.
🧼 Minimal Residue
Leaves behind no oily film or carbonized buildup. Improves surface finish and reduces mold cleaning frequency.
⚙️ Easy to Apply
Suitable for spray, brush, or dip application. Available in flowable and sprayable viscosities.
♻️ PFAS-Free Options Available
We offer PFAS-free and non-silicone versions for clean bonding and environmentally sensitive markets.
Applications for Our Rubber Release Agents
Our products are trusted across a wide range of rubber applications:
- EPDM rubber weatherstrips
- NBR molded gaskets
- NR vibration pads
- Silicone rubber connectors
- Rubber hoses and bellows
- Tire retread molds and sidewall inserts
- Shoe soles and rubber mid-soles
- O-rings, seals, bushings
Custom Formulation Services
No two molding operations are alike. That’s why Green Petro™ offers customized rubber mold release agents based on your:
- Cure temperature & mold geometry
- Material: EPDM, NR, NBR, VMQ, etc.
- Surface finish (matte to glossy)
- Viscosity (shear-thinning or high solids)
- Regulatory compliance (REACH, RoHS, BIS)
📦 MOQ for Custom Formulations: 1 Ton (1000 kg)
We also offer trial samples with lab-tested documentation.
📦 Packaging & Storage
Choose the packaging that suits your operation:
- 20L HDPE Jerrycans (trial & R&D use)
- 200L HDPE Drums (standard batch)
- 1000L IBC Totes (bulk use)
Shelf life: 6–12 months at 5–30°C in shaded storage. All packaging includes batch numbers, pH, viscosity, and application guidance.
🧾 Documentation & Compliance
Every Green Petro™ rubber mold release agent is supported by:
- TDS (Technical Data Sheet)
- SDS / MSDS (Safety Data Sheets)
- VOC, PFAS, and REACH compliance certificates (on request)
- Slip angle and thermal stability reports (ASTM D1894)
🤝 Trusted by Manufacturers Nationwide
Green Petro™’s rubber release agents are used by:
- Automotive component manufacturers
- EPDM extrusion plants
- Tier-1 rubber part suppliers
- Molded footwear factories
- Cable and gasket manufacturers
With fast delivery across India and technical support available before and after purchase, Green Petro™ is your trusted partner in sustainable rubber molding.
📞 Contact Us Today
Ready to upgrade your rubber molding process with clean, high-performance mold release technology?
📧 Email: info@greenpetro.in
📞 Phone: +91-9899-009-726
🌐 Website: www.greenpetro.in